Breakdown AR-SBR & AR Pistol Case (Gen-2)

$159.99

Free ShippingFree Shipping* / prime eligible

Fits AR Pistol or SBR

Padlockable (with customer supplied padlock)

Case has a Lifetime Warranty

Compatible Firearms

  • AR15 Pistol (broken down)
  • SBR AR15
  • Max Upper Length: (See Image)

Compatible Accessories

  • Buffer tube configuration
  • Pistol brace configuration
  • Standard collapsible stock
  • Holds 4 30rd magazines (regular or pmag)
  • Accommodates standard sized optics
  • Accommodates angled foregrips & small hand grips
  • *If you have the Law Tactical AR Folding Stock the bolt carrier group will have to be removed to fit the upper receiver into the case as the extension attached to the bolt is too long to fit
  • Does not fit side-mounted attachments

Case Features

  • Foam is customizable by each individual user based on their gun's features
  • Foam is closed cell military grade polyethylene which can be wiped clean
  • Airline approved for checked luggage
  • Comes with moisture removing silica gel
  • Case is 100% waterproof & dustproof

Only 1 left in stock

Breakdown AR-SBR & AR Pistol Case (Gen-2) - Available at Amazon
Categories: , , , , , SKU: ASSYCC5941PEAR15
Breakdown AR-SBR & AR Pistol Case (Gen-2)
YW-AR15-PISTOL-TOP
Upper Dims
HX-5020-UPRIGHT
HX-5020-PRESSURE-RELIEF-VALVE
HX-5020-PADLOCK
HX-5020-CLOSED
ar15-pistol-case-drawing

Description

The Compact Tactical AR15 Pistol Case by Case Club holds your AR pistol, 4 magazines & silica gel in a slim briefcase style solution. This case will save room & not scream “firearm” to the rest of the world. No larger than a laptop case, you can take this to the range or anywhere else without drawing attention, not to mention it looks awesome! The case is designed by shooters for shooters taking everything we love into consideration. The foam is cut in a way that is pre-scored where you can pull out just the areas you need to fit your unique setup. We recommend using our supplied razor blade to connect the pre-scored cuts (rather than ripping the foam out) in order to keep the foam side walls nice & clean. A lot of thought went into the engineering of this case & we hope you find it as cool as we do!

Breakdown AR-SBR & AR Pistol Case (Gen-2) - Features

Compatible Firearms

  • AR15 Pistol (broken down)
  • SBR AR15
  • Max Upper Length: (See Image)

Compatible Accessories

  • Buffer tube configuration
  • Pistol brace configuration
  • Standard collapsible stock
  • Holds 4 30rd magazines (regular or pmag)
  • Accommodates standard sized optics
  • Accommodates angled foregrips & small hand grips
  • *If you have the Law Tactical AR Folding Stock the bolt carrier group will have to be removed to fit the upper receiver into the case as the extension attached to the bolt is too long to fit
  • Does not fit side-mounted attachments

Case Features

  • Foam is customizable by each individual user based on their gun's features
  • Foam is closed cell military grade polyethylene which can be wiped clean
  • Airline approved for checked luggage
  • Comes with moisture removing silica gel
  • Case is 100% waterproof & dustproof

Product Specifications

Interior Dimensions18.80"L x 13.10"W x 4.35"H
(478mm x 333mm x 110.49mm)
Exterior Dimensions21.50"L x 17.25"W x 4.80"H
(546mm x 438mm x 122mm)
Shipping Weight11.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(4.99 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareNo Wheels, Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodInjection Molded
Manufacturing OriginUnited States of America
Rifle / Shotgun TypeAR Pistol, AR15 (Short Barrel)
Extended TitleFits AR Pistol or SBR
BrandAR Pistol
SKU ASSYCC5941PEAR15

Breakdown AR-SBR & AR Pistol Case (Gen-2)'s Pre-cut Template

Breakdown AR-SBR & AR Pistol Case (Gen-2) - Videos

BreakDown AR SBR & AR Pistol Case

BreakDown AR SBR & AR Pistol Case - Video

Case Club Hydro Absorbent Silica Gel Video - Overview

Case Club Hydro Absorbent Silica Gel Video - Overview - Video

Customer Questions

  1. Q Will this fit / close with a Streamlight Pro Tac HL-X mounted in the 1:30 position (on an M-Lok 4... answer now
    Asked by TPW on July 25, 2024 9:36 am
    Answered by the admin

    In general this case will not work well with side mounted attachments. Side attachments will likely interfere with the lid items and prevent the case from closing.
  2. Q What are the specs of the foam that I can use to purchase blocks of your foam and cut custom inse... answer now
    Asked by TJ on July 4, 2023 9:03 am
    Answered by the admin

    Our foam is closed cell polyethylene (PE). It can be found here: https://www.caseclub.com/product-category/case-club-cases/raw-material/
  3. Q What's the difference between generation 1 and generation 2? answer now
    Asked by Dwayne Leal on September 28, 2021 10:24 am
    Answered by the admin The primary update to this case is the addition of exterior structural ribs to the outside case shell which increases durability. A minor update was the addition of a plastic panel behind the lid foam in which the Velcro is threaded through, making the Velcro straps much stronger when being pulled on.
  4. Q Is this case TSA approved? answer now
    Asked by EUGENE SCHNEIDER on May 19, 2020 11:57 am
    Answered by the admin

    Yes, this case is TSA approved and can be checked on an airplane.
  5. Q Can I buy the foam without the case? answer now
    Asked by Eric Lee on April 10, 2020 4:27 pm
    Answered by the admin

    For this product we don't offer the foam separate from case.
  6. Q My complete upper is under 21" long, but the hand guard is 13" long. Would my gun fit in this case? answer now
    Asked by Rob on November 24, 2019 8:08 am
    Answered by the admin

    Based on the dimensions, the gun should fit into this case. The cutout for the upper is 21.2" long & there are perforations in the foam to accommodate a hand guard that goes almost to the barrel tip. Highlighted in yellow is the foam you will likely need to remove. Of course if you have an optic, you will remove select perforations above the upper as well.
  7. Q Can the mag slot be changed to glock pistol magazines for s pistol caliber rifle? answer now
    Asked by K T on October 20, 2019 2:35 pm
    Answered by the admin We require a minimum order quantity of 10 to make design customizations.
  8. Q Is there a foam insert available for the accessory pocket to accommodate a sub compact handgun? answer now
    Asked by Bruce Hoover on August 26, 2019 5:33 pm
    Answered by the admin

    We don't have a pistol insert that can be put into the accessory pocket area. The primary reason is because that area is intended for the stock/brace to fit into from the lid. Although small accessories can be stored in that area, a full size pistol would prevent the case from shutting if the AR had a stock or brace attached to the lower.
  9. Q Can the mag slots be reconfigured to hold 3 Surefire (60 Rd.) mags? answer now
    Asked by Tom Boyd on April 27, 2019 11:14 pm
    Answered by the admin

    The answer is likely no. The magazine slot in the base of the case cannot be extended or it will hit the case side wall. The 2 magazines in the lid could possibly be connected to allow for a single longer magazine, but it will definitely not hold 3. Furthermore if the magazine in the lid (or base) was not flush with the surface of the foam it would likely hit the other items when shutting the case. All things considered, no this insert could not be modified to hold any 60rd mags.

Send me a notification for each new answer.

Related products

Replacement Foam Sets Compatible With This Case Shell

Optional Accessories …