17-28 Graded Comic Book Slab Collector Case

$189.95

Free ShippingFree Shipping* / prime eligible

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Case Fits

  • 17 Comic Book Slabs Separated, or
  • up to 28 Comic Book Slabs Touching (after cutting out the separator tabs), or
  • up to 208 Loose Comic Books (not in slabs), or
  • A combination of any configuration above

Foam Design Options

  • Remove all the foam plugs for standard (separated) slab storage (qty 17)
  • Cut the finger separators off for increased slab capacity if you don't mind the slabs touching each other (qty 28)
  • Insert the foam spacers (on the sidewall and bottom) to instead securely hold loose comic books (qty 208)
  • Cut the foam spacers smaller and insert select bottom spacers to hold both slabs & loose comic books at the same time
  • Complete customization based on your unique setup

Case Features

  • Case is 100% shippable and airline approved for TSA checked luggage
  • Tilt wheels with extension handle for easy transport
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • 100% Waterproof (IP67) & Dustproof
  • Wide bodied snap latches can be used with thick gloves
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA and TSA approved and compliant in all 50 states
  • Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
  • Built in pressure relief valve for changing altitudes

Please Note

  • The case will weigh ~40 lbs fully loaded, with the slabs separated
  • The case can weigh 52+ lbs fully loaded, with the slab separators cutout and the slabs touching
  • The case DOES have wheels, so transporting the case is conventient and easy
  • Slab slot dimensions: 13.125" x 0.65" x 8.25"
  • *Comic books & slabs depicted are not included

In stock

17-28 Graded Comic Book Slab Collector Case - Available at Amazon
Categories: , , Tags: , , , , SKU: CC5014HXYWCOMICS
17-28 Graded Comic Book Slab Collector Case
Comic Book Case Top View
Comic Book Case Cut View
Comic Book Case Half View
HX-5014 FRONT HANDLE EXTENDED
HX-5014 BACK HANDLE EXTENDED
HX-5014 CLOSED ANGLE
HX-5014 BACK VERTICAL HANDLES UP
HX-5014 FRONT VERTICAL HANDLES UP
HX-5014 CLOSED VERTICAL

Description

The Case Club 17-28 Graded Comic Book Slab Collector Case has a hard exterior to protect the comic books, but features a firm softer foam interior that provides cushion when traveling. We have manufactured this case to accommodate 17 graded comic book slabs separated or up to 28 comic book slabs touching each other. The case is perfect shipping to tradeshows, organization and storage. The foam features built in reliefs that act as display stands for comic book displays.

Please note that when fully loaded, this case can weigh 52+ lbs, though it DOES have wheels to help the user!

22-36 Graded Comic Book Slab Collector Case - Features

Case Fits

  • 17 Comic Book Slabs Separated, or
  • up to 28 Comic Book Slabs Touching (after cutting out the separator tabs), or
  • up to 208 Loose Comic Books (not in slabs), or
  • A combination of any configuration above

Foam Design Options

  • Remove all the foam plugs for standard (separated) slab storage (qty 17)
  • Cut the finger separators off for increased slab capacity if you don't mind the slabs touching each other (qty 28)
  • Insert the foam spacers (on the sidewall and bottom) to instead securely hold loose comic books (qty 208)
  • Cut the foam spacers smaller and insert select bottom spacers to hold both slabs & loose comic books at the same time
  • Complete customization based on your unique setup

Case Features

  • Case is 100% shippable and airline approved for TSA checked luggage
  • Tilt wheels with extension handle for easy transport
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • 100% Waterproof (IP67) & Dustproof
  • Wide bodied snap latches can be used with thick gloves
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA and TSA approved and compliant in all 50 states
  • Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
  • Built in pressure relief valve for changing altitudes

Please Note

  • The case will weigh ~40 lbs fully loaded, with the slabs separated
  • The case can weigh 52+ lbs fully loaded, with the slab separators cutout and the slabs touching
  • The case DOES have wheels, so transporting the case is conventient and easy
  • Slab slot dimensions: 13.125" x 0.65" x 8.25"
  • *Comic books & slabs depicted are not included

Product Specifications

Exterior Dimensions22.50"L x 18.00"W x 10.25"H
(572mm x 457mm x 260mm)
Shipping Weight21.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(9.53 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
SKU CC5014HXYWCOMICS

17-28 Graded Comic Book Slab Collector Case - Videos

17-28 Graded Comic Book Slab Collector Case

17-28 Graded Comic Book Slab Collector Case - Video

Customer Questions

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Related products

Optional Accessories …