2 Rifle/Shotgun & 3 Pistol Case

$279.99

Free ShippingFree Shipping* / prime eligible

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Case Fits

  • Rifles & Shotguns (under 43.4" in Overall Length): Qty 2
  • Pistols (under 9.7" long): Qty 3
  • Rifle Magazines: Up to Qty 24
  • Pistol Magazines: Qty 6+

Case Accommodates

  • Rifle & shotgun optics including scopes & red-dots
  • Pistol grip & non-pistol grip stocks
  • Collapsing & non-collapsing stocks
  • Rifle & shotgun foregrips including vertical foregrips and angled foregrips
  • Rifle & shotgun under barrel attachments including flashlights & lasers
  • Pistol optics including red dots
  • Pistol under barrel attachments
  • Grip fins & featureless rifles

Case Features

  • Wheeled for easy transport
  • Case is shippable and airline approved for TSA checked luggage
  • 4 metal reinforced padlock points that support a customer supplied padlock
  • Case has a lifetime warranty
  • Waterproof (IP67) & Dustproof
  • Built-in pressure release valve
  • Carry handles on each end for a two person lift
  • Interlocking ribs allow the case to be stacked if you have more then one

Foam Features

  • Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil, and won't disintegrate over time
  • Reversible lid hold down blocks to press down and secure guns in place
  • Base support blocks to be used with non-pistol grip stocks
  • Lid relief area for optics
  • Pistol foam spacers that can be used to accommodate shorter pistols
  • Several covered & uncovered storage compartments for magazine and gear storage

In stock

2 Rifle/Shotgun & 3 Pistol Case - Available at Amazon
Categories: , , , SKU: CC1745MJRIF2
2 Rifle/Shotgun & 3 Pistol Case
2 RIFLE MAIN 2
2 RIFLE TOP DOWN 2
2 RIFLE TOP DOWN 4
GUNS-LAID-OUT-ACROSS
2 RIFLE FLAP
2 RIFLE FLAP 2
2 RIFLE DIVIDER FLAP
2 RIFLE HOLD DOWN BLOCK
2 RIFLE plug
2 RIFLE FOAM
2 RIFLE PLUG OUT
2 RIFLE UP CLOSE STOCK
2 RIFLE RIGHT ANGLE
2 RIFLE UP CLOSE CORNER
2 RIFLE TOP DOWN 6
2 RIFLE TOP DOWN
2 RIFLE TOP DOWN 5
2 RIFLE TOP DOWN 3
2 RIFLE MAIN 3
2 RIFLE MAIN 5
2 RIFLE MAIN 7
2 RIFLE MAIN 4

Description

The 2 Rifle/Shotgun Case by Case Club holds up to 2 rifles or shotguns, up to 24 rifle magazines, 3 pistols, and 6 pistol magazines in a tough, waterproof, wheeled, stackable case. The case can fit almost any rifle or shotgun under 43.4″ long, and allows for optics, foregrips, underbarrel attachments, bullpups, pistol grips, and more. It was designed by professionals for hobbyists, enthusiasts, collectors, and agencies alike. The foam is military grade polyethylene which will last a lifetime, is oil proof so it can wiped clean when dirty, and it will not disintegrate over time. The case itself is waterproof, dustproof, shippable, stackable, & TSA approved. A purge valve keeps the moisture out while allowing the case to be opened in high or low altitude. Make sure to watch the video for an in-depth dive into this product’s functions! Protect your investment, buy Case Club.

2 Rifle/Shotgun & 3 Pistol Case - Features

Case Fits

Rifles & Shotguns (under 43.4" in Overall Length)Qty 2
Pistols (under 9.7" long)Qty 3
Rifle MagazinesUp to Qty 24
Pistol MagazinesQty 6+

Case Accommodates

  • Rifle & shotgun optics including scopes & red-dots
  • Pistol grip & non-pistol grip stocks
  • Collapsing & non-collapsing stocks
  • Rifle & shotgun foregrips including vertical foregrips and angled foregrips
  • Rifle & shotgun under barrel attachments including flashlights & lasers
  • Pistol optics including red dots
  • Pistol under barrel attachments
  • Grip fins & featureless rifles

Case Features

  • Wheeled for easy transport
  • Case is shippable and airline approved for TSA checked luggage
  • 4 metal reinforced padlock points that support a customer supplied padlock
  • Case has a lifetime warranty
  • Waterproof (IP67) & Dustproof
  • Built-in pressure release valve
  • Carry handles on each end for a two person lift
  • Interlocking ribs allow the case to be stacked if you have more then one

Foam Features

  • Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil, and won't disintegrate over time
  • Reversible lid hold down blocks to press down and secure guns in place
  • Base support blocks to be used with non-pistol grip stocks
  • Lid relief area for optics
  • Pistol foam spacers that can be used to accommodate shorter pistols
  • Several covered & uncovered storage compartments for magazine and gear storage

Product Specifications

Interior Dimensions44.60"L x 17.30"W x 7.75"H
(1,133mm x 439mm x 196.85mm)
Exterior Dimensions46.75"L x 19.00"W x 9.00"H
(1,187mm x 483mm x 229mm)
I.D. Lid/Base Split2.25"Lid / 5.50"Base
(57mm / 140mm)
Shipping Weight24.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(10.89 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
SKU CC1745MJRIF2

2 Rifle/Shotgun & 3 Pistol Case - Videos

2 Rifle/Shotgun & 3 Pistol Case

2 Rifle/Shotgun & 3 Pistol Case - Video

Case Club 1745

Case Club 1745 - Video

Customer Questions

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Related products

Optional Accessories …