4 Rifle/Shotgun & 3 Pistol Case

$632.45

Free ShippingFree Shipping* / prime eligible

x4 Rifles & Shotguns + x3 Pistols

Case will weight about 75 lbs loaded with guns

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Case Fits

  • Rifles & Shotguns (under 41" in Overall Length): Qty 4
  • Semi-Auto Pistols: Qty 3
  • Rifle Magazines: Qty 12
  • Silica Gel Canister (Included): Qty 1
  • Pistol Magazines: Qty 24+

Case Accommodates

  • Rifle & shotgun optics including scopes & red-dots
  • Rifle & shotgun foregrips including vertical foregrips and angled foregrips
  • Rifle & shotgun under barrel attachments including flashlights & lasers
  • Pistol optics
  • Pistol under barrel attachments
  • Grip fins & featureless rifles

Case Features

  • Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust
  • Case is 100% shippable and airline approved for TSA checked luggage
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • One way hinge pins ensure your gear remains safe and secure
  • Case has a lifetime warranty
  • 100% Waterproof (IP67) & Dustproof
  • Dual built-in pressure release valve
  • Wide bodied snap latches can be used with thick gloves
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA approved and compliant in all 50 states
  • Carry handles on each end for a two person lift
  • Exterior document holder for product identification, handling instructions or destination details
  • Interlocking ribs allow the case to be stacked if you have more then one

Foam Features

  • Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
  • Customizable lid hold down blocks that can be adjusted for each gun
  • Pistol foam spacer that can be removed to accommodate pistol under barrel attachments
  • Large magazine compartment with dual level foam spacers and foam lid
  • General storage area below rifle foregrips for gloves, gear and miscellaneous items
  • Perforations to deepen foam cradle so bullpups will fit

Case Will (Likely) Not Fit

  • Large side attachments
  • Bipods
  • Large bolts that stick out the side
  • Side by Side Barreled Guns

In stock

4 Rifle/Shotgun & 3 Pistol Case - Available at Amazon
Categories: , , SKU: CC6084HXYWRIF4
Multiple Rifle or Shotgun Case & 3 Pistols
4 AR15 Rifle Case
4 AK-47 Case
4 Rifle/Shotgun & 3 Pistol Case
4 AR15 Rifle Case
multiple-ar-pistol-case
multiple-long-gun-case
4 AK-47 Case
multiple-rifle-case
4-RIFLE-case dimension diagram
4-RIFLE-TOP1
4-RIFLE-TOP2
4-RIFLE—ADJUSTERS-info
4-RIFLE—BULLPUP-ADJUSTER-info
4-RIFLE—MAGAZINE-STORAGE-info
4-RIFLE—MAGAZINE-PUZZLE-PIECES-info
4-RIFLE—PISTOL-CLOSE-UP-info
4-RIFLE—PISTOL-INSERT
4-RIFLE—PISTOL-PERFORATIONS-info
GUNS-LAID-OUT-ACROSS
MainView05376
CLOSED-CASE
MainView05369
MainView05372
MainView05373
MainView05374
MainView05375
9105182268899685269.0
-8296611671113961622.0
8254473947080341780.0
7697836701434599857.0

Description

The 4 Rifle/Shotgun Case by Case Club holds up to 4 Rifles, 12 Rifle Magazines, and 3 Semi-Auto Pistols in a tough, waterproof, wheeled, stackable case. The case can fit any rifle or shotgun under 41″ long, and allows for optics, foregrips, underbarrel attachments, bullpups, pistol grips, and more. It comfortably holds four rifles and up to 12 rifle magazines so you can have quick access to your firearms on and off the range. It was designed by professionals for hobbyists, enthusiasts, collectors, and agencies alike. 100% of the foam is military grade polyethylene which will last a lifetime, and it is oil proof so it can wiped clean when dirty. The case itself is crushproof, waterproof, dustproof, shippable, stackable, TSA approved, & has a lifetime warranty. Dual purge valves keep the moisture out while allowing the case to be opened in high or low altitude, and each case includes a free silica gel canister to absorb moisture and help keep everything rust free. Make sure to watch the video for an in depth dive into this product’s functions! Protect your investment, buy Case Club.

4 Rifle/Shotgun & 3 Pistol Case - Features

Case Fits

Rifles & Shotguns (under 41" in Overall Length)Qty 4
Semi-Auto PistolsQty 3
Rifle MagazinesQty 12
Silica Gel Canister (Included)Qty 1
Pistol MagazinesQty 24+

Case Accommodates

  • Rifle & shotgun optics including scopes & red-dots
  • Rifle & shotgun foregrips including vertical foregrips and angled foregrips
  • Rifle & shotgun under barrel attachments including flashlights & lasers
  • Pistol optics
  • Pistol under barrel attachments
  • Grip fins & featureless rifles

Case Features

  • Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust
  • Case is 100% shippable and airline approved for TSA checked luggage
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • One way hinge pins ensure your gear remains safe and secure
  • Case has a lifetime warranty
  • 100% Waterproof (IP67) & Dustproof
  • Dual built-in pressure release valve
  • Wide bodied snap latches can be used with thick gloves
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA approved and compliant in all 50 states
  • Carry handles on each end for a two person lift
  • Exterior document holder for product identification, handling instructions or destination details
  • Interlocking ribs allow the case to be stacked if you have more then one

Foam Features

  • Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
  • Customizable lid hold down blocks that can be adjusted for each gun
  • Pistol foam spacer that can be removed to accommodate pistol under barrel attachments
  • Large magazine compartment with dual level foam spacers and foam lid
  • General storage area below rifle foregrips for gloves, gear and miscellaneous items
  • Perforations to deepen foam cradle so bullpups will fit

Case Will (Likely) Not Fit

  • Large side attachments
  • Bipods
  • Large bolts that stick out the side
  • Side by Side Barreled Guns

Product Specifications

Interior Dimensions41.50"L x 13.50"W x 12.00"H
(1,054mm x 343mm x 304.8mm)
Exterior Dimensions44.50"L x 16.50"W x 14.00"H
(1,130mm x 419mm x 356mm)
Shipping Weight31.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(14.06 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Quantity of Long Guns4
Extended Titlex4 Rifles & Shotguns + x3 Pistols
SKU CC6084HXYWRIF4

4 Rifle/Shotgun & 3 Pistol Case - Videos

4 Rifle/Shotgun & 3 Pistol Case

4 Rifle/Shotgun & 3 Pistol Case - Video

Case Club Hydro Absorbent Silica Gel Video - Overview

Case Club Hydro Absorbent Silica Gel Video - Overview - Video

Customer Questions

  1. Q Will a Tavor Bullpup fit in this case? answer now
    Asked by Kevin on January 24, 2024 7:59 am
    Answered by the admin

    Yes. However be advised there are perforations cut into the foam that need to be removed in order to properly fit bullpups. The product video does a good job visually showing where those perforations are located. Once the perforations are removed they cannot be put back in so the spot would be permanently altered for the bullpup.
  2. Q Will a 6.5 Creedmoor Bolt Action Rifle with foldable stock fit into the case? Once the stock is c... answer now
    Asked by Steven Sopp on August 23, 2023 11:51 am
    Answered by the admin

    A 6.5 Creedmoor Bolt Action Rifle with foldable stock has not been tested in this case, but it is unlikely to work. Even though the the overall length might be with tolerance when folded, the stock itself will have no where to go. I think it could be possible to have the stock fold into the rifle holder next to it, but that could require foam modifications and will definitely lower the capacity from 4 to 3 long guns if it did work.

Send me a notification for each new answer.

Optional Accessories …