5 Pistol Case (Gen-3)

From: $114.95

Free ShippingFree Shipping* / prime eligible

Semi-Autos Only

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

General Case Features

  • Holds 5 pistols, 20 magazines (+5 more in the magwells)
  • Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust
  • Case is 100% shippable and airline approved for TSA checked luggage
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • One way hinge pins ensure your gear remains safe and secure
  • Case has a lifetime warranty
  • 100% Waterproof (IP67) & Dustproof
  • Built-in pressure release valve
  • Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights
  • Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths
  • Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner
  • Wide bodied snap latches can be used with thick gloves
  • Extended front handle length helps counter balance off center weighted loads
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA approved and compliant in all 50 states

Interior Foam Features

  • Easily convert the case from a 5 pistol version to a 4 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 5 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations for the price of one!
  • Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
  • Magazine compartments are dual level & will fit both single & double stack mags of varying lengths
  • Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size
  • Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones

Gen-3 Updates Include

  • Improved clamp latches that are easier to use and provide more clamping force
  • Metal Reinforcement added to padlock points for added security
  • Increased handle thickness with added finger groves for more comfortable carrying
  • Manual purge valve knob updated for more comfortable grip
  • Exterior case shell updated to be more athletically pleasing
  • Removable label plate eliminated for simplicity
$114.95

In stock

5 Pistol Case (Gen-3) - Available at Amazon
Categories: , , , SKU: ASSYCC171163ISKPIS5
5-PISTOL---MAIN-(CROPPED)

Customer Questions

  1. Q Will this fit full-size 2011 pistols with Reddot optics (i.e. Staccato P, Bul Tac Pro, etc 5" bar... answer now
    Asked by JK on November 24, 2024 8:34 am
    Answered by the admin

    This case should indeed fit full size 2011 pistols with rmr optics, although they will likely be on the "snug" side. The accessory pocket measures 10.5" L x 4.1" W x 3.8" H.
  2. Q What is the difference e tween to normal and lighter version? Where do you lose the weight? answer now
    Asked by Scott on May 1, 2022 5:58 am
    Answered by the admin

    The lighted version does not weigh less. It has a battery powered LED light built into the lid which turns on and lights up the case in darkness when you open the case. You can learn more about it here: https://www.youtube.com/watch?v=uJ4Ktdf3ULQ
  3. Q How wide are the pistol slots on this case? answer now
    Asked by John Hollabaugh on April 11, 2022 2:46 pm
    Answered by the admin

    The barrel cutout width is 1" wide. The grip cutout is 1.28" wide.
  4. Q Will a relief need to be cut for any rail mounted lights? answer now
    Asked by Lawrence on October 14, 2019 11:17 am
    Answered by the admin

    No relief cuts will be necessary for rail mounted lights/lasers. Simply position the pistol horizontally instead of angled (as shown below). There is already a cutout relief below the barrel in which the light can protrude into.
  5. Q Will HK USP 45 expert fit? How about CZ P-09? answer now
    Asked by Flo on September 14, 2019 12:22 am
    Answered by the admin

    Both of these guns will fit. You can confirm with certainty by double checking their size as well.
  6. Q Can you purchase complete replacement foam insides and if so the price? answer now
    Asked by Del Brock on June 4, 2019 10:34 am
    Answered by the admin We currently do not sell the foam separate for this product.
  7. Q What size locks does this item require? answer now
    Asked by Keith Cruz on March 24, 2019 11:46 am
    Answered by the admin

    The padlock hole is about 3/8" diameter which means it will not fit standard sized padlock shackles. You will have to use a medium or small sized lock such as our medium duty combo lock.
  8. Q Does the foam ship already cut? Is it in one piece in which we have to pull out the pre-cut slots? answer now
    Asked by Keith Cruz on March 22, 2019 11:01 am
    Answered by the admin

    The foam is pre-cut and does not require any major cutting on your part. When you receive the product you will have to remove the pre-cut slots, but those are easily removed and after they are taken out, the foam will be ready to hold your guns & magazines.
  9. Q I currently own the following guns. 1. Canik TP9SA 9mm. 2) Heritage Rough Rider 22. 3) Kimber Ult... answer now
    Asked by Terry Muse on March 15, 2019 10:08 pm
    Answered by the admin

    Due to the fact a few of your guns are revolvers I would recommend going with our 5 revolver & accessory case. Although all your guns are under the max 8 5/8" dimension, the revolver cylinders are too wide for the pockets. Customers have made our semi-auto pistol cases work with their revolvers, but it often means the foam must bend wider then it should or a relief must be cut to accommodate the cylinder.

    All our revolver cases will fit both revolvers & semi-autos, but our semi-auto cases will not all fit revolvers.
  10. Q I bought a 5 gun case, but there is no manual on how the guns are placed. I have not seen any vid... answer now
    Asked by Bruno on November 25, 2018 8:40 pm
    Answered by the admin

    We are working on an updated video for this product, which will be available soon. In the meantime here is an old video of how the guns are positioned. The case is shipped with the foam plugs in place so be sure to remove those plugs before use. There are 2 levels of foam plugs and both levels will need to be removed. Please call us if you need additional information. No cutting is required on your end as the foam is already precut ready to go. 877.412.2737

    https://www.youtube.com/watch?v=_HlD_47Gp4U
  11. Q Is the foam insert military grade polyethylene? Exactly like in the picture? answer now
    Asked by Thomas on November 22, 2018 11:47 am
    Answered by the admin

    Yes. The foam in the base of the case is closed-cell military grade polyethylene just as the pictures show. For reference the foam in the lid is polyurethane.

Send me a notification for each new answer.

Related products

Optional Accessories …