AR15 Rifle Case (Gen-2)

From: $149.95

Free ShippingFree Shipping*

Fits AR15 & Pistol

Padlockable (with customer supplied padlock)

Case has a Lifetime Warranty

Compatible Firearms

  • AR-15 Carbine Rifle with collapsible stock (Max length of 34.8")
  • Semi-Auto Pistol
  • Does not fit Pinned/Fixed/Full stocks, although our AR10 Case does!

Compatible Rifle Accessories

  • Scope or Optic (within a 3.7" height)
  • Over Barrel Attachments
  • Allows for a forward (vertical) grip, laser or flashlight mounted directly under the rail
  • Holds up to 2 standard or pmag (30-rd) magazines

Case Features

  • Case is 100% waterproof & dustproof
  • Comes with a pressure release purge valve
  • Compact design leaves no wasted space
  • Hydro absorbent silica gel canister included to help prevent rust
  • Waterproof accessory box included for your small items
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage

Gen-2 Upgrades Include

  • Stainless steel added to padlock points for added security
  • 2 edge wheels added so the case can roll
  • Orange peel texture added to exterior finish to minimize scratches
  • Structural ribs added to outside of case for increased durability
  • 2 handles added (one on each end)
  • Front handle length increased to help counter balance off center weighted loads
  • Wide bodied snap latches that can be used with gloves
Categories: , , , SKU: VV-D8YY-JPWX

Description

Max Rifle & Optic Length

The Case Club AR15 rifle case is the best out there. The precut foam will fit AR15 rifles with a standard 16″ barrel & collapsible stock. The case will also hold your rifle magazines, full size or compact pistol, pistol magazine, silica gel canister (included), waterproof accessory box (also included), & more in the generic accessory pocket. The case itself is waterproof, dustproof, & has a built in pressure equalization valve for changing altitudes. It is heavy duty enough to ship or check on an airplane and can handle all the abuse from TSA agents. Four built in heavy duty latches ensure nothing gets in or out. Padlockable holes are also built right in, which can take standard sized masterlocks so you can be guaranteed this case is safe & secure. The foam insert is closed cell military grade polyethylene which can be wiped clean if wet or oily. The foam is perforated above and below the main AR15 cutout so you can remove the foam (with included knife!) as needed to customize the insert for your unique optics and attachments. The pistol cutout is also perforated so a full size fits just as snug as a compact. The two cutouts for the rifle magazines can hold either 10, 20 or 30 round regular or pmag magazines (223/556). Reusable silica gel canister is included to remove moisture from within the case. Once the silica gel is saturated just pop it in the oven to cook out the moisture & use it again. A waterproof accessory box is also included, and it is perfect for storing your cleaning supplies and small tools. The lid holds a foam combination of convoluted (egg crate) & closed cell polyethylene, specifically engineered to hold everything down perfectly. This case is compact, organized, & uses all available space to the fullest. Protect your investment, buy Case Club.

AR15 Rifle Case - Features

Compatible Firearms

  • AR-15 Carbine Rifle with collapsible stock (Max length of 34.8")
  • Semi-Auto Pistol
  • Does not fit Pinned/Fixed/Full stocks, although our AR10 Case does!

Compatible Rifle Accessories

  • Scope or Optic (within a 3.7" height)
  • Over Barrel Attachments
  • Allows for a forward (vertical) grip, laser or flashlight mounted directly under the rail
  • Holds up to 2 standard or pmag (30-rd) magazines

Case Features

  • Case is 100% waterproof & dustproof
  • Comes with a pressure release purge valve
  • Compact design leaves no wasted space
  • Hydro absorbent silica gel canister included to help prevent rust
  • Waterproof accessory box included for your small items
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage

Gen-2 Upgrades Include

  • Stainless steel added to padlock points for added security
  • 2 edge wheels added so the case can roll
  • Orange peel texture added to exterior finish to minimize scratches
  • Structural ribs added to outside of case for increased durability
  • 2 handles added (one on each end)
  • Front handle length increased to help counter balance off center weighted loads
  • Wide bodied snap latches that can be used with gloves

Product Specifications

Interior Dimensions37.00"L x 13.00"W x 5.12"H
(940mm x 330mm x 130.048mm)
Exterior Dimensions40.00"L x 16.00"W x 5.50"H
(1,016mm x 406mm x 140mm)
Shipping Weight21.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(9.53 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Rifle / Shotgun TypeAR15 Rifle
Pistol TypeFits Semi-Autos
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Manufacturing OriginUnited States of America
Extended TitleFits AR15 & Pistol
Condition New | Refurbished
SKU VV-D8YY-JPWX

AR15 Rifle Case (Gen-2)'s Pre-cut Template

AR15 Rifle Case (Gen-2) - Videos

Case Club AR15 Rifle Case - Overview

Case Club AR15 Rifle Case - Overview - Video

Case Club Hydro Absorbent Silica Gel Video - Overview

Case Club Hydro Absorbent Silica Gel Video - Overview - Video

Customer Questions

  1. Q Will this case accommodate a Sig MPX PCC 16 inch? answer now
    Asked by Mike Vincent on February 6, 2023 4:31 am
    Answered by the admin

    If the overall length of the rifle is less than the max length of 34.8" long, then the gun can be made to fit. However it looks like the handguard of that rifle is longer than a standard carbine so it will require you to customize the foam. It is likely the handguard will overlap with the pistol cutout and could affect how a pistol fits there.

  2. Answered by the admin

    Negative. It will  be almost impossible to properly convert this case to hold 2 ARs. Your best bet is to purchase our small universal rifle case, which uses the same case shell, but has uncut PE foam in the base for you to customize yourself.

  3. Q Will this case fit the Springfield Saint Edge? answer now
    Asked by Ken Briscoe on December 5, 2019 10:23 pm
    Answered by the admin

    If the length of the rifle (from the tip of the barrel to the back of the stock when collapsed) does not exceed 34.8" then the Springfield Saint Edge will fit.

  4. Q I have a Ruger 556 with a red dot sight, will it fit? answer now
    Asked by Rodney on August 21, 2019 8:57 pm
    Answered by the admin Yes. Your Ruger 556 with red dot sight will fit nicely.
  5. Answered by the admin

    A red dot will not fit in the cutout because the top of the pistol is too close to the edge of the case. A rail mounted light however will fit. Simply use the included razor knife to follow the cut lines as shown below.

  6. Q Are the padlock points reinforced? answer now
    Asked by Justin on December 30, 2018 7:18 pm
    Answered by the admin

    The padlockable holes built into this case do not have metal reinforcements.

  7. Q Is the foam insert for this case sold separately? answer now
    Asked by Jahkeem on December 12, 2018 10:41 am
    Answered by the admin

    While this foam insert can technically be bought separate from the case it would be considered a one-off (since we normally mass produce this product) and therefore more expensive then just buying the case and foam as-is. A higher cost purchase could be justified if you already had a case (possibly sentimental) that you really wanted to use or were looking to order in higher quantities for resale which would lower the pricing. For an individual however it would make more sense from a cost stand point to purchase the whole case then just the foam.

  8. Answered by the admin

    Case Club manufacturers this case here in the USA. Other case models can be requested with this foam set however be advised we mass produce this case & foam which brings down the production cost. If we were to manufacture a single foam set in a different case the overall product cost would increase substantially. Most customers opt to go with this product as-is due to the higher cost of switching cases.

    You will find our case is an industry leading product and on par or superior compared to other name brands.

  9. Answered by the admin

    This case was designed around a standard AR15 carbine with a 16" barrel. Based on that I suspect your overall rifle length is longer than 36" which would prevent it from fitting into this case. Your firearms however would fit into our AR10 case which would accommodate the longer barrel and gear you mention. All our rifle case designs are flexible in the fact they can fit a variety of different accessories however if you wanted an insert tailed to your specific weapons and gear you would want to consider a custom foam insert. Going that route will be more costly, but we can custom cut the foam to achieve an absolute perfect fit. To put our custom cutting capabilities into perspective we can follow the contour of a picatinny rail. Generally the cost ends up being about double what a premade case costs. If you want to go that route feel free to call us and we would be happy to advise further. 877.412.2737

  10. Q Will this case hold an AR15 short barreled rifle? (SBR)? answer now
    Asked by Darren Plehn on January 5, 2017 6:28 pm
    Answered by the admin Yes it will although there will be extra (empty) room at the end of the barrel where a longer barrel would have gone.

Send me a notification for each new answer.